With pinball making a substantial resurgence across the nation, Gentle Giant wishes to ensure that these timeless, beautiful devices remain damage-free while being transported. Oh, and we want individuals moving them to be safe, too.
Initially glance, pinball devices can appear frightening to move because of their weight, fragility, and size. The good news is, our experienced Giants have a few techniques up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox
The majority of contemporary pinballs (made in the last Twenty Years approximately) have a hinge system which allows the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either 2 or four bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State machines.
Later devices have hinges and utilize a locking system to keep the headbox upright. There may also be 2 bolts inside as included safety, in case the latch is broken or unintentionally un-latched.
For Electro-Mechanical pinball makers, you require to remove the headbox rear gain access to panel to get access to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, however with time the secret may have been lost. On a regular basis, there is a screw keeping this panel in location.
As soon as inside, remove the bolts and unplug the big adapters that have wiring going down into the device. You might wish to identify these connectors to put them back in the right spot, however they need to be various sizes, making it difficult to plug back incorrectly.
You can now eliminate the headbox totally, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Strong State Pinballs
For early Strong State Pinballs, you will have to remove the back glass. There is a lock situated on the headbox in one of three locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the.
When opened, get rid of the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.
Then, open up the back box lamp panel by raising the lock situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise up the light panel in order to swing it open.
Now that you are within, you can get rid of the bolts, and any plugs that have wires going down into the machine. You may wish to label these plugs to put them back in the best area. You might not have to get rid of the plugs, as the wiring should be long enough to allow the headbox to be folded down.
At this point, you can lock up the light panel and change the back glass.
Modern Strong State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Using the supplied key, turn the latch 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the device. This is an easy setup and needs no tools.
You're done if you can now fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
You require to get within if you can not fold the head box down. There is a lock situated at the top of the back glass in the center. Utilize the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, then pulling it out from the bottom.
Next, you will need to eliminate the screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
Eliminate the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you utilize some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Eliminating the Legs.
Pinball Device legs are held in location by 8 bolts. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into.
These captive nuts and threaded plates can be damaged, and the use of extra nuts may have been required. If this is the case, you will need to open up the front door of the pinball, slide out the playfield glass, and raise the playfield.
With the front door (coin door) open, move the lock down bar lock throughout and get rid of the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise up the playfield by putting your hand where the ball drains, and lift the website playfield up.
You ought to now have access to any nuts that may have been used. Once any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.
Be sure to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to match.
Filling the Pinball.
You are now prepared to transfer your pinball device. Before you pack it, make sure you remove the pinballs so they don't bounce around during transportation.
If you are navigate here moving the pinball utilizing a van or SUV, it might be much easier to eliminate the legs simply prior to packing the device. Get a buddy to have and help among you supporting the pinball, while the other gets rid of the front legs. Move the device in, and after that remove the back legs. It is much simpler to pack the machine front.
Make sure you strap the pinball in, as you do not want it moving if you need to stop unexpectedly!
For Electro-Mechanical pinball devices, you need to remove the headbox rear gain access to panel to get access to the bolts and plugs within. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
If you are moving the pinball utilizing a van or SUV, it may be easier to remove the legs simply prior to filling the device. Grab a friend to have and assist one of you supporting the pinball, while the other eliminates the front legs.